38 Hardware jobs in Islamabad

Key Responsibilities:

• Design and develop electronic hardware for embedded systems and industrial applications.
• Select components based on performance, cost, and availability considerations.
• Create and review schematics, PCB layouts, and BOMs using Altium, KiCad, or Eagle.
• Ensure power management, signal integrity, and compliance with EMI/EMC standards.
• Conduct hardware validation, testing, and debugging to ensure optimal performance.
• Collaborate with firmware, mechanical, and production teams for seamless system integration.
• Develop and maintain technical documentation (design files, test reports, and user manuals).
• Support prototype development and transition designs from concept to mass production.
• Stay updated on emerging technologies, industry trends, and best practices.
• Required Skills & Qualifications:
• Proficiency in schematic design and PCB layout tools (Altium Designer, KiCad, Eagle, etc.).
• Strong knowledge of microcontrollers, analog/digital circuits, power electronics, and signal processing.
• Experience with hardware debugging tools (oscilloscopes, logic analyzers, multimeters, etc.).
• Familiarity with EMI/EMC compliance standards and design best practices.
• Understanding of DFM (Design for Manufacturing) and DFT (Design for Testability).
• Excellent problem-solving, analytical, and debugging skills.
• Ability to work both independently and in a team-oriented environment.

Education & Experience:
Bachelor’s degree in Electrical/Electronics Engineering, Mechatronics, or a related field.
3+ years of experience in electronics hardware design and development.

#J-18808-Ljbffr

Job Title:

Hardware Verification Engineer

Industry:

Semiconductors / Embedded Systems / SoC Design

Job Summary:

We are seeking a skilled

Hardware Verification Engineer

with hands-on expertise in IP and SoC-level verification. The ideal candidate will have experience in developing verification environments, integrating VIPs, creating UVM testbenches, and executing coverage-driven regressions for various digital IPs and subsystems.

Key Responsibilities:

Lead verification of Match-Action Pipeline and UART/IPs with staged customer deliveries. Drive bring-up, test planning, and execution for UART, I3C, I2C, and Ethernet peripherals. Develop reusable APB protocol verification environments. Integrate commercial Ethernet VIPs at block and chip levels (800G/400G/100G). Create and execute UVM sequences for PCIe/CXL traffic generation and validation. Configure and verify I3C chiplet and HUB chiplet communications with processor cores. Validate NIC400 infrastructure and system address mapping for SoC flows. Perform Control/Status Register (CSR) verification for Ethernet chiplets. Drive coverage closure (line, toggle, FSM) and establish regression setups. Automate Register Abstraction Layer (RAL) flows for efficient verification.

Preferred Skills:

Strong command of UVM methodology and SystemVerilog. Experience with industry-standard VIPs and simulators. Deep understanding of AMBA protocols (APB, AXI), Ethernet, PCIe, I3C. Familiarity with chiplet-based architecture and IP integration.

Let me know if you'd like this adapted for a resume, job ad, or LinkedIn format. #J-18808-Ljbffr

Key Responsibilities: Design and develop electronic hardware for embedded systems and industrial applications. Select components based on performance, cost, and availability considerations. Create and review schematics, PCB layouts, and BOMs using Altium, KiCad, or Eagle. Ensure power management, signal integrity, and compliance with EMI/EMC standards. Conduct hardware validation, testing, and debugging to ensure optimal performance. Collaborate with firmware, mechanical, and production teams for seamless system integration. Develop and maintain technical documentation (design files, test reports, and user manuals). Support prototype development and transition designs from concept to mass production. Stay updated on emerging technologies, industry trends, and best practices. Required Skills & Qualifications: Proficiency in schematic design and PCB layout tools (Altium Designer, KiCad, Eagle, etc.). Strong knowledge of microcontrollers, analog/digital circuits, power electronics, and signal processing. Experience with hardware debugging tools (oscilloscopes, logic analyzers, multimeters, etc.). Familiarity with EMI/EMC compliance standards and design best practices. Understanding of DFM (Design for Manufacturing) and DFT (Design for Testability). Excellent problem-solving, analytical, and debugging skills. Ability to work both independently and in a team-oriented environment. Education & Experience: Bachelor’s degree in Electrical/Electronics Engineering, Mechatronics, or a related field. 3+ years of experience in electronics hardware design and development.

#J-18808-Ljbffr

Hardware Specialist
Xerosector Technologies, Pakistan

We are looking for a highly energetic and motivated individual with strong communication skills and a good knowledge of internet, computer hardware, troubleshooting, and software installation. The successful candidate will be capable of managing inventory records on spreadsheets, working beyond deadlines, and demonstrating commitment and enthusiasm.

Job Specification

Responsibilities include:

1. Computer Hardware
2. Software Installation
3. Internet Troubleshooting

Location: Information Technology and Services - Islamabad, Pakistan

#J-18808-Ljbffr

Hardware Specialist Xerosector Technologies, Pakistan

We are looking for a highly energetic and motivated individual with strong communication skills and a good knowledge of internet, computer hardware, troubleshooting, and software installation. The successful candidate will be capable of managing inventory records on spreadsheets, working beyond deadlines, and demonstrating commitment and enthusiasm. Job Specification

Responsibilities include: Computer Hardware Software Installation Internet Troubleshooting Location: Information Technology and Services - Islamabad, Pakistan

#J-18808-Ljbffr

Get AI-powered advice on this job and more exclusive features.

Direct message the job poster from SwipBox

CHRP I Talent Acquisition I Technical Recruiter I Employer Branding I HR Operations I Employee Engagement I People & Culture I HR Digitalization I

About the Role - We are seeking a talented Hardware Design Engineer (BLE & RF) who is passionate about wireless connectivity and embedded systems. The ideal candidate will bring a deep understanding of the BLE protocol , from stack to hardware, and combine it with practical expertise in debugging, optimizing, and validating BLE designs. You will play a pivotal role in ensuring our BLE-enabled products are robust, secure, and optimized for performance, from antenna and PCB design review to over-the-air packet analysis to security compliance .

Responsibilities

• Design and develop RF circuits, components, and systems for wireless communication products. Focus on design and validation of devices that use Bluetooth Low Energy (BLE) technology.
• Perform simulations, evaluate feasibility, and refine designs for enhanced efficiency.
• Analyze the test data, resolve RF issues, and implement improvements to enhance system performance.
• Perform simulation, modeling, and validation of RF circuit performance during development stages.
• Review and critique PCB designs for BLE modules, antennas, and RF paths to ensure optimal signal quality, range, and compliance.
• Debug and optimize BLE communication at all layers (PHY, Link Layer, GATT, Security), diagnosing issues like connection instability, latency, or interference.
• Perform detailed BLE security analysis , ensuring products comply with best practices for pairing, bonding, key management, and encryption.
• Capture and analyze BLE air traffic using sniffers (e.g., Nordic nRF Sniffer, Ellisys, or similar) to identify and resolve protocol-level or interoperability issues.
• Collaborate with hardware, firmware, and software teams to resolve cross-disciplinary issues.
• Write clear documentation and share findings with engineering teams, advocating for sound RF and BLE practices.
• Regularly implement best practices and remain informed about the latest developments in RF simulation.
• Stay current on BLE specification changes, new features (e.g., BLE 5.x/5.4, Periodic Advertising, AoA/AoD), and trends in BLE security and RF design.

Requirements - Education & Background

• Bachelor's/Master's degree in: Electrical Engineering, Computer Engineering, or related field
• Minimum 3 to 5 years of hands-on experience.
• Skilled in the use of key RF testing equipment such as spectrum analyzers, signal generators, and VNAs.
• Solid theoretical and practical understanding of Bluetooth Low Energy protocol stack and architecture (Host & Controller) .
• Strong background in RF fundamentals as it applies to BLE (impedance matching, antenna design, RF layout considerations).

BLE-Specific Skills

• Proficient in BLE debugging tools and techniques:
• Air sniffers (e.g., Nordic nRF Sniffer, Ellisys, Frontline)
• Protocol analyzers
• In-depth knowledge of BLE security modes & procedures, including pairing methods, authentication, encryption, and privacy.
• Understanding of power optimization techniques for BLE communication.
• Ability to review and critique BLE-related PCB designs , with a focus on antenna selection, placement, matching networks, and ground plane considerations.
• Familiarity with common BLE chipsets and modules, hands-on experience with Nordic Semiconductor’s nRF52/nRF53 series is a big plus .
• RF testing and measurement basics (VSWR, return loss, spectrum analysis).

General Skills

• Strong problem-solving and critical thinking mindset.
• Ability to communicate technical findings clearly to both technical and non-technical audiences.
• A team player who collaborates effectively in a multidisciplinary environment.

Preferred Qualifications (Nice to Have)

• Experience with BLE Mesh, Direction Finding (AoA/AoD), or Bluetooth 5.4 Periodic Advertising with Responses.
• Familiarity with embedded development toolchains and debugging (e.g., Segger, Keil, GCC, Zephyr RTOS).
• Knowledge of regulatory compliance for RF devices (FCC, CE, etc.).
• Hands-on experience tuning and validating antenna performance in an anechoic chamber or similar environment.

Seniority level

• Seniority level Mid-Senior level

Employment type

• Employment type Full-time

Job function

• Job function Information Technology
• Industries Transportation, Logistics, Supply Chain and Storage

Referrals increase your chances of interviewing at SwipBox by 2x

Connectivity Engineer (Trading Platform)

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

Get AI-powered advice on this job and more exclusive features. Direct message the job poster from SwipBox CHRP I Talent Acquisition I Technical Recruiter I Employer Branding I HR Operations I Employee Engagement I People & Culture I HR Digitalization I

About the Role -

We are seeking a talented

Hardware Design Engineer (BLE & RF)

who is passionate about wireless connectivity and embedded systems. The ideal candidate will bring a deep understanding of the

BLE protocol , from stack to hardware, and combine it with practical expertise in debugging, optimizing, and validating BLE designs. You will play a pivotal role in ensuring our BLE-enabled products are robust, secure, and optimized for performance, from

antenna and PCB design review

to

over-the-air packet analysis

to

security compliance . Responsibilities Design and develop RF circuits, components, and systems for wireless communication products. Focus on design and validation of devices that use Bluetooth Low Energy (BLE) technology. Perform simulations, evaluate feasibility, and refine designs for enhanced efficiency. Analyze the test data, resolve RF issues, and implement improvements to enhance system performance. Perform simulation, modeling, and validation of RF circuit performance during development stages. Review and critique PCB designs for BLE modules, antennas, and RF paths to ensure optimal signal quality, range, and compliance. Debug and optimize BLE communication at all layers (PHY, Link Layer, GATT, Security), diagnosing issues like connection instability, latency, or interference. Perform detailed

BLE security analysis , ensuring products comply with best practices for pairing, bonding, key management, and encryption. Capture and analyze BLE air traffic using sniffers (e.g., Nordic nRF Sniffer, Ellisys, or similar) to identify and resolve protocol-level or interoperability issues. Collaborate with hardware, firmware, and software teams to resolve cross-disciplinary issues. Write clear documentation and share findings with engineering teams, advocating for sound RF and BLE practices. Regularly implement best practices and remain informed about the latest developments in RF simulation. Stay current on BLE specification changes, new features (e.g., BLE 5.x/5.4, Periodic Advertising, AoA/AoD), and trends in BLE security and RF design. Requirements - Education & Background Bachelor's/Master's degree in: Electrical Engineering ,

Computer Engineering, or related field Minimum 3 to 5 years of hands-on experience. Skilled in the use of key RF testing equipment such as spectrum analyzers, signal generators, and VNAs. Solid theoretical and practical understanding of

Bluetooth Low Energy protocol stack and architecture (Host & Controller) . Strong background in

RF fundamentals

as it applies to BLE (impedance matching, antenna design, RF layout considerations). BLE-Specific Skills Proficient in BLE debugging tools and techniques: Air sniffers (e.g., Nordic nRF Sniffer, Ellisys, Frontline) Protocol analyzers In-depth knowledge of BLE security modes & procedures, including pairing methods, authentication, encryption, and privacy. Understanding of power optimization techniques for BLE communication. Ability to review and critique

BLE-related PCB designs , with a focus on antenna selection, placement, matching networks, and ground plane considerations. Familiarity with common BLE chipsets and modules,

hands-on experience with Nordic Semiconductor’s nRF52/nRF53 series is a big plus . RF testing and measurement basics (VSWR, return loss, spectrum analysis). General Skills Strong problem-solving and critical thinking mindset. Ability to communicate technical findings clearly to both technical and non-technical audiences. A team player who collaborates effectively in a multidisciplinary environment. Preferred Qualifications (Nice to Have) Experience with BLE Mesh, Direction Finding (AoA/AoD), or Bluetooth 5.4 Periodic Advertising with Responses. Familiarity with embedded development toolchains and debugging (e.g., Segger, Keil, GCC, Zephyr RTOS). Knowledge of regulatory compliance for RF devices (FCC, CE, etc.). Hands-on experience tuning and validating antenna performance in an anechoic chamber or similar environment. Seniority level

Seniority level Mid-Senior level Employment type

Employment type Full-time Job function

Job function Information Technology Industries Transportation, Logistics, Supply Chain and Storage Referrals increase your chances of interviewing at SwipBox by 2x Connectivity Engineer (Trading Platform)

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

Get AI-powered advice on this job and more exclusive features.

Direct message the job poster from SwipBox

CHRP I Talent Acquisition I Technical Recruiter I Employer Branding I HR Operations I Employee Engagement I People & Culture I HR Digitalization I

Job Summary:

We are seeking a Product Owner to join our Firmware/Hardware team , taking full ownership of the product lifecycle from concept through development to successful launch. The ideal candidate will have an understanding of embedded systems, product lifecycle management, and experience working with consumer electronics or industrial IoT products.

Key Responsibilities:

• Take ownership of product innovation, end-to-end development, and successful product delivery.
• Serve as the Product Owner for Scrum teams, ensuring a clear product vision, roadmap, and well-aligned priorities.
• Translate business goals into actionable product requirements, user stories, and acceptance criteria.
• Maintain and continuously groom the product backlog to ensure a steady pipeline of prioritized work.
• Lead backlog refinement, sprint planning, and release planning activities.
• Collaborate closely with engineering, QA, design, and hardware teams to deliver high-quality embedded solutions.
• Coordinate with hardware engineers to ensure seamless firmware-to-device integration.
• Collect and analyze user feedback, market research, and competitor insights to guide product decisions.
• Communicate product vision, updates, and roadmaps to technical teams and key stakeholders.
• Identify and resolve project impediments to ensure sprint and release goals are met.
• Support go-to-market activities in partnership with Product Management, Sales, and Marketing.
• Actively participate in Agile ceremonies including daily stand-ups, sprint reviews, and retrospectives.

Required Qualifications:

• 5+ years of experience as a Product Owner or Product Manager in Agile environments.
• Proven experience working on firmware, embedded systems, or hardware-centric products.
• Strong understanding of Agile principles and Scrum methodologies.
• Bachelor's or Master's degree in Engineering, Computer Science, or a related field.
• Excellent leadership, collaboration, and communication skills.
• Ability to bridge technical and business requirements into clear, actionable product work.

Preferred Skills:

• Proficiency with Agile tools such as JIRA, Confluence, or similar platforms.
• Understanding of firmware development cycles, testing frameworks, and hardware-software integration challenges.
• Proven experience as a PO working on embedded/hardware-centric products .
• Strong analytical, strategic thinking, and user-centric problem-solving abilities.
• Comfortable working in a fast-paced, cross-functional, and highly technical environment.

Seniority level

• Seniority level Mid-Senior level

Employment type

• Employment type Full-time

Job function

• Job function Product Management and Information Technology
• Industries Transportation, Logistics, Supply Chain and Storage

Referrals increase your chances of interviewing at SwipBox by 2x

Sign in to set job alerts for “Product Owner” roles. Senior Business Analyst (Onsite, Islamabad, Remittance Salary) Assistant Manager Product - Liability & Bancassurance

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr

Get AI-powered advice on this job and more exclusive features. Direct message the job poster from SwipBox CHRP I Talent Acquisition I Technical Recruiter I Employer Branding I HR Operations I Employee Engagement I People & Culture I HR Digitalization I

Job Summary: We are seeking a

Product Owner

to join our

Firmware/Hardware team , taking full ownership of the product lifecycle from concept through development to successful launch. The ideal candidate will have an understanding of embedded systems, product lifecycle management, and experience working with consumer electronics or industrial IoT products. Key Responsibilities: Take ownership of product innovation, end-to-end development, and successful product delivery. Serve as the Product Owner for Scrum teams, ensuring a clear product vision, roadmap, and well-aligned priorities. Translate business goals into actionable product requirements, user stories, and acceptance criteria. Maintain and continuously groom the product backlog to ensure a steady pipeline of prioritized work. Lead backlog refinement, sprint planning, and release planning activities. Collaborate closely with engineering, QA, design, and hardware teams to deliver high-quality embedded solutions. Coordinate with hardware engineers to ensure seamless firmware-to-device integration. Collect and analyze user feedback, market research, and competitor insights to guide product decisions. Communicate product vision, updates, and roadmaps to technical teams and key stakeholders. Identify and resolve project impediments to ensure sprint and release goals are met. Support go-to-market activities in partnership with Product Management, Sales, and Marketing. Actively participate in Agile ceremonies including daily stand-ups, sprint reviews, and retrospectives. Required Qualifications: 5+ years of experience as a Product Owner or Product Manager in Agile environments. Proven experience working on firmware, embedded systems, or hardware-centric products. Strong understanding of Agile principles and Scrum methodologies. Bachelor's or Master's degree in Engineering, Computer Science, or a related field. Excellent leadership, collaboration, and communication skills. Ability to bridge technical and business requirements into clear, actionable product work. Preferred Skills: Proficiency with Agile tools such as JIRA, Confluence, or similar platforms. Understanding of firmware development cycles, testing frameworks, and hardware-software integration challenges. Proven experience as a PO working on

embedded/hardware-centric products . Strong analytical, strategic thinking, and user-centric problem-solving abilities. Comfortable working in a fast-paced, cross-functional, and highly technical environment. Seniority level

Seniority level Mid-Senior level Employment type

Employment type Full-time Job function

Job function Product Management and Information Technology Industries Transportation, Logistics, Supply Chain and Storage Referrals increase your chances of interviewing at SwipBox by 2x Sign in to set job alerts for “Product Owner” roles.

Senior Business Analyst (Onsite, Islamabad, Remittance Salary)

Assistant Manager Product - Liability & Bancassurance

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

#J-18808-Ljbffr