73 Safety Standards jobs in Pakistan

About Us: Join our dynamic and innovative team at Chaplet International Pvt. Ltd. We are looking for an energetic, enthusiastic, and motivated individual.

Industry: Medical Metal Fabrication (Surgical/ Medical Device Instruments)

Job Location: 28km Ferozepur Road, Lahore, Pakistan

Reporting To: Director Production

Job Purpose:

To ensure that all fabricated medical metal components and assemblies meet the company's quality standards, customer requirements, and relevant international standards (ISO 13485, ISO 9001, etc.). The QC Engineer is responsible for implementing quality procedures, conducting inspections, analyzing defects, and driving continuous improvement in manufacturing quality.

Key Responsibilities:

· Perform in-process and final inspections of fabricated parts, welds, machined components, and assemblies.

· Inspect and verify raw material upon receipt to ensure it meets quality standards using instruments such as Vernier calipers, micrometers, gauges, height gauges, radious gauges etc.

· Verify surface finishing, passivation, and polishing quality per medical-grade requirements

· Ensure raw materials meet specifications and verify incoming inspection reports.

· Document and maintain inspection records, quality reports, and non-conformance reports (NCRs)

· Implement and monitor compliance with ISO 13485, ISO 9001, CE Mark, and GMP/ MDR quality requirements.

· Support preparation and execution of internal and external audits (e.g., by certification bodies or clients).

· Ensure proper traceability of materials, parts, and production batches.

· Assist in maintaining Device History Records (DHR) and Device Master Records (DMR) for medical devices.

· Investigate quality issues and customer complaints, perform root cause analysis (RCA), and propose corrective & preventive actions (CAPA).

· Develop and maintain control plans, FMEA, and process validation reports

· Participate in process validation, equipment qualification, and calibration activities

· Identify and drive process improvements to reduce rework, scrap, and defects.

· Support training of operators and inspectors on inspection techniques and quality procedures

· Recommend improvements in fabrication, welding, and polishing processes to achieve consistent quality.

· Prepare daily, weekly, and monthly QC reports, highlighting trends and key performance indicators (KPIs)

· Maintain updated Standard Operating Procedures (SOPs) and Work Instructions (WIs).

· Entering data of all the inspection stages in ERP (SAP B1)

Skills:

· Strong understanding of Quality Management Systems (QMS) and SOP implementation.

· Deep knowledge of metal manufacturing processes to identify and resolve quality issues.

· Ability to interpret blueprints, technical documents, and manuals.

· Excellent leadership, communication, and problem-solving skills.

· ISO 13485 & ISO 9001 quality management systems

· Strong documentation and reporting skills.

· Experience using precision measurement equipment to ensure adherence to specifications

· ISO 13485 & ISO 9001 quality management systems

· Good knowledge of metal processes: casting, forging, perforation, machining, welding, heat treatment, injection molding, finishing etc.

· Strong skills in measurement tools & equipment (calipers, micrometers, gauges, etc).

· On‐time Delivery with acceptable quality after controlling rework.

· Strong analytical and problem-solving abilities

Qualification:

· Bachelor's degree in Metallurgy, Mechanical Engineering, Manufacturing Engineering

· Experience: 3-5 years of relevant experience in metal manufacturing / fabrication; of which at least 1-2 years in a supervisory role.

What We Offer:

• Salary market competitive with other benefits (Paid leaves within Probation Period, Annual Bonus, Leave Encashment, Provident Fund, Salary Increment after Probation Period, EOBI, Life Insurance & many more)
• Opportunity for growth and career advancement.

Job Location:

Parwain Thay, Julke, 28-KM Ferozepur Road, Near Grand Avenue Housing Society, Lahore-53100

Application Process:

To apply for this position, please submit your CV at We look forward to reviewing your application and considering you for our team. Please clearly mention the post in the subject while applying.

**Only residents of nearby areas (Ferozepur road) will be preferred. Please don't apply if you don't meet the above criteria or live far away.

Job Type: Full-time

Pay: Rs70, Rs100,000.00 per month

Application Question(s):

• Do you have a supervisory role in metal fabrication industry? How many years?

Work Location: In person

About Us

Our client is a growing textile manufacturing company specializing in high-quality knitted garments, particularly sweatshirts and hoodies. With a commitment to delivering world-class products, we are looking for an experienced QC/QA Manager to ensure consistent product quality, compliance with international standards, and customer satisfaction.

Key Responsibilities

• Quality Control (In-Process & Final):
• Oversee quality checks at all stages of production – knitting, cutting, stitching, finishing, and packaging.
• Ensure measurements, stitching accuracy, fabric quality, trims, and embellishments meet buyer specifications.
• Identify, document, and resolve defects or non-conformities promptly.
• Quality Assurance (Systems & Standards):
• Develop and implement quality control procedures, SOPs, and inspection guidelines.
• Maintain compliance with international quality standards (AQL, ISO, buyer standards, etc.).
• Coordinate with production teams to prevent recurring defects.
• Client & Buyer Coordination:
• Communicate directly with buyers/clients for quality requirements and audits.
• Prepare inspection reports and maintain transparent documentation.
• Facilitate buyer inspections and third-party audits.
• Team Leadership & Training:
• Train production staff and QC inspectors on quality standards.
• Foster a culture of accountability, consistency, and continuous improvement.

Requirements

• Minimum 5 years of proven experience in textile manufacturing, specifically in knitwear (sweatshirts, hoodies, fleece-based products).
• Strong knowledge of fabric behavior, shrinkage, GSM, color fastness, and finishing techniques.
• Hands-on experience in AQL inspection methods and international buyer standards.
• Ability to lead quality teams with fairness, attention to detail, and a problem-solving mindset.
• Excellent reporting, documentation, and communication skills.

Nice-to-Have

• Experience working with export-oriented apparel factories.
• Knowledge of Lean Manufacturing / Six Sigma in textiles.
• Familiarity with sustainability and compliance certifications (GOTS, OEKO-TEX, WRAP, BSCI, etc.).

What We Offer

• Competitive salary with growth opportunities.
• A quality-driven culture where your expertise directly impacts customer satisfaction.

Job Type: Full-time

Work Location: In person

We are looking for an experienced Quality Control Manager to plan and supervise a quality control of construction projects from start to finish.

• Develop and implement project-specific quality control plans, procedures, and checklists.
• Inspect and monitor construction activities to ensure compliance with drawings, specifications, codes, and standards.
• Conduct material inspections and verify test results before approval for use at site.
• Supervise and monitor concrete works, steel fixing, formwork, finishing, and other activities for quality compliance.
• Ensure proper documentation of all inspections, tests, and approvals.
• Coordinate with site engineers, subcontractors, and consultants for quality-related matters.
• Review and verify contractors' quality assurance/quality control (QA/QC) documentation.
• Identify non-conformances (NCR) and issue corrective and preventive action reports.
• Ensure calibration of testing equipment and verification of third-party test reports.
• Maintain records of quality audits, inspections, and tests for project handover.
• Ensure health, safety, and environmental compliance during inspections.
• Provide training and guidance to site staff on quality standards and procedures.
• Liaise with Project Manager/Construction Manager for quality-related issues and propose solutions.
• Assist in preparing monthly/weekly quality reports for management and clients.

Job Type: Full-time

Work Location: In person

Placement is one of a key HR function. Barrett Hodgson Pakistan thrives on its human resources for achieving its strategic and business objectives. It has a highly motivated team manning various departments who have clearly laid down roles to perform. The objective of a well-designed job is to enable management and staff to strive at their optimum to achieve desired results, we believe that;

• Our people are our most valuable asset.
• We view Human Resources as a competitive advantage.
• We ensure business goals are realized through people while meeting their own personal aspirations and development.
• We ensure only motivated and professionally qualified people are employed.
• Barrett Hodgson is an equal opportunity employer with policies to ensure there is no discrimination on the basis of caste, creed, sex, etc.

The objective is to hire the right person for the right job at the right time and place qualified and experienced individuals fulfilling the pre-determined standards demanded by the position and established by the Company. Selection process is transparent and done strictly on merit and No under age employment as per relevant laws is made/effective.

If you think you are meeting the job specification and requirements and have the passion for success and ability to perform and grow, apply now at

Quality Control (Microbiological Lab) – Executive / Sr. Officer

Candidate should be BS /M.Sc.(Microbiology) with 2-5 years experience in Micro Lab. and can work on microbiological instruments.

Job Advertisement – Quality Control (QC) Officer

Location: Sundar Industrial Estate, Lahore

Industry: Advanced Composites & Armor Protection

Reports To: Production Manager / QC Manager

About the Role

• We are a leading manufacturer of advanced ballistic protection products including UHMWPE UD sheets, soft armor, hard armor, and lightweight combat helmets.
• We are seeking a Quality Control (QC) Officer to lead a small QC team (3 members) and ensure our production meets international standards of quality and reliability. The ideal candidate will bring strong quality assurance experience from classified or critical industries (automotive, defense, technical textiles, or high-performance polymers).

Key Responsibilities:

• Lead and supervise a QC team for daily inspections and testing.
• Conduct raw material, in-process, and final product quality checks.
• Ensure compliance with ISO, GMP, and defense-related quality standards.
• Document and report non-conformities; lead corrective and preventive actions.
• Maintain calibration and accuracy of testing equipment.
• Collaborate with production and QA teams to resolve quality issues.
• Support implementation of quality improvement initiatives.
• Prepare inspection records and reports for audits and customer compliance.

Requirements:

• Education: Bachelor's in Industrial/Polymer/Materials/Mechanical Engineering, Chemistry, or related field.
• Experience: 3–5 years in Quality Control / Quality Assurance within a classified or critical industry.
• Strong knowledge of ISO 9001, GMP, or other quality management systems.
• Familiarity with testing procedures (mechanical, physical, and chemical).
• Strong analytical and problem-solving skills.
• Proficiency in MS Office (Excel, Word, PowerPoint).
• Good communication, documentation, and leadership skills.
• Confidentiality and integrity are essential.
• Preferred Certifications (an advantage, not mandatory)
• Six Sigma (Green Belt/Yellow Belt)
• ISO 9001:2015 Internal/Lead Auditor
• ISO Testing/Calibration)

Why Join Us?

• Be part of a classified defense manufacturing project.
• Opportunity to lead a QC team in a high-standards environment.
• Work with cutting-edge materials and advanced processes.
• Grow your career in a fast-evolving defense and composites sector.

Job Type: Full-time

Pay: Rs80, Rs120,000.00 per month

Work Location: In person

QC Officer Job Responsibilities:

• Undertakes risk analysis.
• Completes quality assurance reviews.
• Analyzes data to verify information and uncover fraud.

QC Officer Qualifications/Skills:

• Banking Experience
• Excel / word/ PDF
• Attention to detail.
• Analytical and critical thinking skills
• Quantitative skills
• Strong time management and multitasking skills
• Strong communication skills in English
• Must have confidence to make correspondence with the banks.

Job Types: Full-time, Fresher

Pay: Rs32, Rs35,000.00 per month

Work Location: In person

• Perform routine and non-routine chemical and physical testing of raw materials, in-process samples, and finished products.
• Conduct stability studies and prepare stability reports in compliance with guidelines.
• Operate, calibrate, and troubleshoot analytical instruments such as HPLC, GC, UV-Vis, FTIR, dissolution testers.
• Review test results, identify deviations and assist in root cause analysis and CAPA implementation.
• Ensure strict compliance with GMP, GLP, DRAP, and pharmacopeial standards (USP/BP/EP).
• Document all activities in laboratory records & logbooks with accuracy and timeliness.
• Participate in internal and external audits, providing required documentation and support.
• Collaborate with QA, Production, and R&D teams to resolve quality related issues and improve processes.
• Maintain stock of reagents, chemicals, and consumables required for smooth lab operations.

Job Type: Full-time

Pay: Rs40, Rs45,000.00 per month

Application Question(s):

• Only apply if you have 1 to 2 years of pharmaceuticals QC experience

Experience:

• QC Analyst: 2 years (Required)

Work Location: In person

Company Description

Starting from a modest organization in 1975, GM Cables & Pipes (Pvt) Ltd. has established itself as a leading name in the cable, polymer pipe, and ducts industry. Known for setting high standards in quality and safety, the company operates from its plant located at Ferozpur Road, Lahore. The plant is equipped with sophisticated manufacturing and testing equipment. Quality has been the hallmark of GM products, consistently maintained throughout the years.

Role Description

This is a full-time on-site role based in Lahore for a Quality Control Engineer at GM Cables & Pipes (Pvt) Ltd. The Quality Control Engineer will be responsible for overseeing the manufacturing process, conducting quality assessments, implementing quality control protocols, and ensuring products meet company and industry standards. The role also involves coordinating with production teams, maintaining documentation, and identifying areas for quality improvement.

Qualifications

• Quality Assurance, Quality Control, and Testing skills
• Experience in manufacturing processes and equipment
• Proficiency in documentation and reporting
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Bachelor's degree in Engineering, Material Science, or related field
• Experience in the cable and polymer pipe industry is a plus

1.   
POSITION SUMMARY:

This position is responsible for executing quality control functions and ensuring that all activities comply with applicable regulations and standards. The role involves coordinating reporting lines, reviewing and updating SOP, and working under prescribed laboratory guidelines in accordance with company GLP/cGMP standards and all applicable SOPs, policies, and procedures. The incumbent must also ensure compliance with ISO 9001, ISO 17025, Halal, and EHS policies and procedures.

JOB RESPONSIBILITIES:

• Ensure all activities are performed in accordance with
  Good Laboratory Practices (GLP)
  and
  current Good Manufacturing Practices (cGMP)
  .
• Follow the assigned
  daily work schedule
  and ensure timely completion of all laboratory tasks.
• Ensure that all work is conducted as per
  approved specifications
  ,
  standard operating procedures (SOPs)
  , and
  applicable regulatory requirements
  .
• Responsible for all
  microbiological activities
  within the plant.
• Prepare, update, and maintain records of
  AAS standards
  .
• Perform analysis using
  modern instrumental techniques
  as per approved methods.
• Check and verify daily testing work for
  raw materials
  ,
  packaging materials
  , and
  finished products
  .
• Conduct
  new analytical method development
  and
  analytical test method validation
  as per established protocols.
• Ensure that
  Material Safety Data Sheets (MSDS)
  and
  Halal Certificates
  are available and updated for all incoming materials in the QC laboratory.
• Verify that all
  new source materials
  are approved by the
  Halal Certification Body (HSB), Pakistan
  , before use.
• Update the
  approved vendor list
  following evaluation and confirmation by the Halal certification body.
• Perform
  physical, chemical, microbiological, and instrumental testing
  as per authorized procedures, including:
• Raw material testing
• Bulk and semi-finished product testing
• Stability testing
• Water testing
• Maintain
  stability study results
  , records, and related documentation.
• Prepare and implement
  SOPs
  for new instruments and analytical techniques.
• Perform accurate and timely
  data entry in SAP
  .
• Ensure that all laboratory operations comply with
  GLP
  ,
  cGMP
  ,
  EHS
  ,
  ISO 9001
  ,
  ISO 17025
  , and
  Halal
  standards.
• Ensure that all relevant
  quality standards and regulatory requirements
  are met daily.
• Support and participate in
  customer and regulatory audits/inspections
  , ensuring full compliance and documentation readiness.
• Continuously monitor and improve laboratory practices to maintain
  quality, safety, and regulatory compliance
  .

1.   
JOB SPECIFICATIONS:

Experience Required (Years)

2-3 – Years in Quality Control / Microbiologist

Qualification (Academics)

MSc/ B. Pharmacy